|
|
|
|
 |
 |
 |
||||||
 |
| The cube Mixer is a based on a movement, which through its tumbling effect produces in the shortest possible time a homogeneous mixture. The product to be mixed is treated very gently. The cube Mixer can be attached to the universal gearing. The housing is manufactured from stainless steel. This Attachment is Suitable to Attached in our Both Main Drive.
Technical Data:
| |
| The dry Granulator consists of two motor driven rollers with teeth. This forces the material to be granulated with very low proportion of powder. This is a very sturdy attachment and can be run continuously for granulating tablets / slugs and pellets & Suitable to Attached in our Both Main Drive.
Technical Data:
| |
| This apparatus is used for molding suppositories, lipsticks and similar products. This equipment permits melting, agitation and mixing during the filling operation. Stainless steel kettle and agitator are heated by a glycerin bath and 1000 watt heating element. Thermostat permits adjustment of temperature of kettle contents from 20 to 100 C by 1 graduation. The sled, below the filler nozzle, holds any type of mould. It is adjustable in all directions and controlled by a hand wheel. Capacity of kettle is 3.5 lt. Heating jacket requires 2.75kg of glycerin. Production varies with material, moulds, etc. but production rates up to 4000 moulds per hour are not unusual. This Attachment is Suitable to Attached in our Both Main Drive. The pot for filling and molding suppositories and lipsticks are suitable for attach on our Main Drive the mould as per the requirement of customer can be designed at extra cost.
Technical Data:
| |
| The Mass Mixer having horizontal half round bowl open on upper side with acrylic cover and specially designed mixing blade. The Main Mixing Blade is rotated to circulate the material to be mixed. The half round bowl and mixing blade made out of stainless steel having bowl capacity of 5 kg. And operational capacity of 3.5 kg.[approx]. Within few minutes, it can be empty by tilting. The power mixer is suitable for our Both Main Drive.
Technical Data:
| |
| The mixer operates with plough shape type mixing elements and is designed for dry mixing of powders, granulates and fiber particle containing products. Differences in volume ranging to 1:100000 can be mixed homogeneously within a few minutes. The drum, unilaterally supported on one side, is tilt able and has a 5 liters capacity. Operating capacity is between 3-4 liters. The mixing drum made of stainless steel has a removable cover through which the material can be loaded and unloaded. The mixing tools as well as the connecting flange of the mixing drums are of stainless steel and are highly polished. The drum is attached with an adjustable tension spring. The apparatus is suitable to be connected to our Both Main Drive.
Technical Data:
| |
| The Mini Ball Mill is suitable to attach with Universal Gearing. This is suitable for preparing small samples for analysis or for grinding or mixing small quantities of power substances. The Mini ball Mill utilizes 15 mm diameter steel balls and has a total capacity of 0.5 liters. This Attachment is Suitable to Attached in our Both Main Drive.
Technical Data:
| |
| The unit is equipped with a tilting and locking device, which is easy to operate. This permits adjustment of the infinitely variable setting of the pan angle, over its whole range. For the cleaning of the sides as well as the bottom of the pan an adjustable scraper is provided. Parts coming in to contact with the material to be processed are made of polished stainless steel. The material to be processed is fed manually, or with a metering device, if a continues is required. The tilted palletizing pan, which rotates in a clockwise direction, is tilted to our motor drive. The material is brought to practically the highest point of the pan and then rolls down in the even scrim, to the lower half of the pan. In accordance with the nature of the material the necessary quantity of liquid to from the pellets is added in certain places. The rolling movement and the addition of moisture causes pellet form. Due to the tilted pan and the movement of the material the larger pellets are carried to the top surface. The size of the pellets can be influenced by the tilting angle of the pan by the amount of liquid added and the method, which it is introduced. As soon as the pan is full the pellets will continuously roll over the edge of the pan. This Attachment is Suitable to Attached in our Both Main Drive.
Technical Data:
| |
| This mixer is designed to be used as a mixing for pastes ointments & creams. It can also be used for wet powders. This mixer is provided with a mixing paddle and Teflon scrapper, which is shaped in such manner so that there is minimum clearance with the mixing kettle. The kettle is also easily removable.
Technical Data:
| |
| An ideal mixer for creams, ointments, pastes, and liquids, but also for wetted powders. The sturdily constructed planetary gear can be equipped with various mixing and kneading attachments, made of stainless steel. Depending upon type of the material to be processed, a dough arm, a mixing paddle. Any material, which sticks to the walls of the kettle, is scraped continuously by the Teflon scrapper, which is shaped to fit exactly the kettle wall. Therefore, homogeneous mixing results in the shortest time. The vacuum planetary mixer is suitable to attach on Both Main Drive.
Technical Data:
| |
Copyright
© Karishma Pharma Machines, All Rights Reserved 
