Vibro seperator are circular gyratory screens used to separate mass composition of solids from solids, liquid from solid and for gradation of materials as per particle sizes, having a very wide range of user friendly application.

This is accomplished by vibrating the screens in three different planes along the vertical axis by means of a specially designed vibratory motor having off-centred weights at the top and bottom end of the motor shaft.

The top weight causes vibration in the horizontal plane which causes the material to move across the screen towards the periphery. The lower weight creates vibration in the vertical tangential axis. The angle of lead of the lower weight with relation to the upper weight provides variable control of the screening pattern.

Thus the material moves across the screens and also in the vertical and tangential planes enabling maximum screening.

Vibro sifter are available with a wide range of possible screen sizes(mesh) option for multiple deck separation is also possible.

The Unit consist of

Specially designed vibratory motor to run on 400/440V, 3 phase, 50 Hz electric supply, with adjustable eccentric weights at the top and bottom of the motor shafts mounted vertically at the centre of the screening unit.

Screening unit consists of SS 304 screen sandwiched along with gaskets to avoid powder leakage, between SS 304 bowl and hopper with the help of special clamps. This is in turn clamped to the base plate.

3 Rugged Springs placed over the circular motor base amplify the vibration and at the same time restrict Vibration from being transferred to the floor.

Options Available

• Multi deck screening.(20% extra cost)
• MOC : All contact parts in S.S. 304 and polished to pharmaceutical finish.

Application :
Multi Mill is widely used for wet & dry granulation pulvensation etc. of Pharmaceutical, Chemical, Bulk drug. Cosmetic, Colours, Dyestrutts, Food products etc.

Description
The unit consists of stainless steel hopper, processing chamber with beater assembly. motor, DOL stater, three speed puley, screen and study body.

Opreation
SS beaters having knife and impact edge rotate within a selected screen. The material fed in the hoper enters into the processing chamber where it moves to the penfery and passes through screen. Output & quality of final product depends on

• Shape of beaters (Knife/impact edge)
• Speed
• Size of screen